Working at heights is one of the riskiest job, and therefore needs those who work at heights to perform with the appropriate safety precautions. There are number of safety precautions one should take and one of those is the usage of Scaffold.
Scaffolding is basically a temporary structure which is used to support the original structure. Those who use it are at risk of falls which ultimately can result in death or disablity. If appropriate safety practices and protocols are observed then such safety structures are quite safe like other elevated techniques. It is important that these scaffoldings are stable and strong so that the construction work can be done properly.
Let’s take a brief look at 7 essential scaffolding safety tips:
1. Proper Training
According to the latest safety policies, it is made important for the employees working on or near scaffolding are properly trained and informed on how the scaffolds were designed and operated.
This includes how to get on and off of the scaffolding properly, how to prevent falls and how to respond to emergency situations even while on the scaffolding. This sort of training is very important to keep not only yourself, but everybody else on and below the scaffolding.
2. Check Scaffolding properly
Always ensure that you inspect scaffolding thoroughly before using it. Check to make sure the base is secured, and that it is leveled and adjusted properly according to the lean of the building. Make sure that every single guardrail and plank is installed safely and securely, and also look out for elevation changes, obstructions (such as wires), and weather conditions.
Always be sure that you always inspect scaffolding properly before using it. Ensure that each and every guardrail and plank is installed securely and firmly, and also look for the elevation changes, obstructions (such as wire connections), and climate.
3. Fall Protection and PPE
OSHA expresses that employees must have fall cover when focusing on a scaffold 10 foot or higher. They require:
- On a proper maintained scaffold: the utilization of a guardrail or personal fall detention system.
- Over a single-point or two-point suspended scaffold: both use of any guardrail and personal fall arrest system
- On an aerial lift: solely the utilization of an individual fall arrest system.
Each worker’s support must be attached back to a structural anchor that is fully proficient to withstand the 5,000 pounds of lifeless weight. Workers must wear hard hats and ensure rubbish nets, toe-boards and displays are in location to stop things from falling.
4. Competent vs Qualified
Understanding the several roles of a competent person and a professional/qualified person is important within any industry. Whenever using scaffolds, a competent person must have the capability to train and instruct the employees who will be working on constructing or moving scaffolds.
They need to check the scaffold before every transfer and after any event that may have damaged the structural integrity of the scaffold.
A competent person must identify unsafe conditions and also have stop work ability in order to keep up a safe place of work. Whereas a professional person gets the specific knowledge and training to create the scaffold and its own proper rigging.
5. Keep things organized
Scaffolding structure is notoriously cramped, so that it is really important that tools aren’t overlooked and are placed up nicely on the scaffolding itself. Keep every one of the walkways clear of obstructions and garbage that could be able to result in a fall.
6. Understanding load capacity
Throughout the design phases of scaffolding, one of the key mistakes is failing to consider the several types of load that the materials will be under during development and setup.
To be able to maximize the safety of everyone engaged, do not try to overload the scaffolding with more number of workers than it is graded for just to conserve time. Also take the time to ensure that it’s not overloaded by equipment, and this nothing is pressing against any guardrails.
7. Take advantage of guardrails
When taking the design of a scaffold into consideration, a construction company must ensure that any scaffolding over 10 feet high has guardrails on the three edges/sides facing away from the building, at the very least.
The side facing the building is still a danger, so it is recommended to have them there as well. Guardrails should not be viewed as a replacement or alternative for true fall protection gear, which should be worn at all times while on the scaffolding.
By following these regulations, workers/employees can be assured that they will go back home safely.
BE SAFE!! BE HAPPY!!
This Guest post was written by Stanley Stem, a Content Writer of Bastion Safety Solutions. He specializes in sharing his views about workplace safety. He is keen to create awareness in employees/workers on how they can keep themselves safe and secure while working either at any construction site or in any organization. He loves to research and provide the useful information to his readers.
Did you enjoy reading that?
Why not read this on managing building contractors?